Instructions for Ford EXPLORER production to 2001
- Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds. You must end this procedure with key in “ignition ON” position. The locks will lock and unlock fast about 3 times. This means the system is in learn mode.
- Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle. Door locks will cycle to confirm programming.
- Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming
- Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Instructions for Ford EXPLORER Produced From 2002
- Close all doors.
- Open drivers door and press the UNLOCK button on drivers door panel while door is open.
- Insert key in ignition and turn ignition to ON.
- Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds. You must end this procedure with key in “ignition ON” position. The locks will lock and unlock fast about 3 times. This means the system is in learn mode.
- Within 20 seconds press the lock button on all of the remotes you want to program to that car. Door locks will cycle to confirm programming.
- Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming
- Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.