with infrared remote control

• Ensure all doors and windows on the vehicle are shut.
• Insert key into driver’s door lock.
• Turn the key to the unlock position 3 times ( key must be held in open position by 0.5 seconds )
• Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

• Point the key at the receiver located near the rear view mirror.
• Press and hold the lock button.
• Still pressing the lock button - press the unlock button 3 times.
• Release the lock button.

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four. Wait 15 seconds before trying remote.

REMOTE CONTROL 5WK4 790/97/98 and others

• Insert key into driver’s door lock.
• Turn the key to the unlock position 3 times and keep the key in the lock opening position for 5 sec.
• Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

• Press and hold the lock button.
• Still pressing the lock button - press the unlock button 3 times.
• Release the lock button.

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four. Wait 15 seconds before trying remote.

7M3959753,7M3 959 753 and compatible

• Open and close the both front windows.
• One of the key switch on the ignition and leave the key in this position.
• Get out of the car, close the door and insert second key into driver’s door lock.
• Turn the key to the unlock position 3 times ( key must be held in open position by 1 seconds ).
• Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

• Press and hold the lock button.
• Still pressing the lock button - press the unlock button 3 times.
• Release the lock button.
• Open the door with the key manually ( not via remote control )

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four.